The Difference Between a Hub and a Router
By Benedict Yossarian
For someone who needs a quick clarification on the matter, a hub combines all linked
computers or workstations into a network, while router links two separate and distinct
networks to each other. Hubs generally operate at layer 1 of the open system
interconnection (OSI) reference model as compared to the layer 3 of the routers.
The explanation given above may be sufficient for an individual who possesses a
background with the workings of an OSI reference model. But for an average Joe who has yet
to trudge the intricate world of networking, the explanation may raise more questions than
answers. Devoid of networking knowledge, one can easily get confused with regard to the
difference between a hub and a router.
Computer Networking
When one wants to link two computer units together, he may opt to use cables and wires
to physically connect the two. This is the most basic form of networking. However, what if
the person requires that more than two computers and a few peripherals be connected? Will
he be obligated to purchase network cards for each workstation? Certainly not. Here enters
the need for a device that will receive the signals transmitted from one computer unit and
transfer it to one of the few other machines linked within the network.
Hub
This is one tool that can answer one's networking problems. Basically, this is a
multi-port repeater, which connotes that the signals that travel into one port get
conveyed into each and every port simultaneously. This is essentially what a hub
does---forwarding electrical signals. It does not distinguish electric signals or care to
look into the pieces of data themselves. One can simply send a packet over a cable linked
to a hub and the data will still be transmitted to all other ports.
This is a plain and straightforward device, not to mention that it is affordable and easy to use.
Why the Need For Routers?
Why not link all computers using several hubs? Unfortunately, networking is not that
simple. There exists a fundamental scheme or system arranged into the networks that are
being used today. This is the basic principle: only a single machine linked to a network
may transfer or share data at any given time. Only one. This is due to the fact that one
cannot have a bunch of electrical signals concurrently flowing in a single cable.
Imagine two individuals talking at the exact moment. Odds are, no one will understand
any information disseminated. This applies in the field of networking as well, but in
grander and more serious scale. The collision and corruption of packets is the consequence
rooted from a synchronized transmission using a hub.
But to be fair, when two computers do send a file at the same time, the computers will
inherently back off and halt (for a certain amount of time) any further transfer of data.
After the temporary queue, the machine will yet again try to send off the data. This may
be bearable for a small-scale network. However, at this day and age, with the amount of
traffic a network may receive, a hub is definitely out of the picture.
Router
This is practically a computer bearing a couple of network cards, thus, connecting two
networks and enabling the computers within the networks to send and share data while
bouncing off unsolicited transmissions coming from whichever. Usually, networks may be
physically or logically split, though either way a router is still needed.
A router is also responsible for detecting a remote network path. Going into details
will entail much more than a few pages of explanation. But in a nutshell, what occurs is
that the router begins to construct a routing table in its internal memory where the
topology of the linked networks is housed.
And as for the name, the router acquired the same because of its function - to route
packets to other networks. Ergo, a router.
Benedict Yossarian is specialises in internet marketing. Benedict recommends Comm store
for networking hardware and Cat5 Cable.
More Networking Topologies Articles:
• Overview of IEEE 802.11 Wireless Lan Technology
• Hubs, Switches and Routers - What's the Difference?
• What Are Pseudo-Wires?
• Data Center Management Best Practices
• Voice Over IP Protocols and Components
• An introduction to Linux Network Routing
• The IEEE 802.3 Ethernet Standards
• VLAN (Virtual Local Area Network) Basics
• Computer Network Routers, Hubs, and Switches
• Computer Networking Devices
| 
About BTH
User Agreement
Privacy
Site Map
Contact
News Feeds
RSS Feed
Follow @Stephen Bucaro
Basics and Certification
