Instead of making a minimum amount of bandwidth available for specific traffic types, you might want to limit available bandwidth. Both traffic policing and traffic shaping tools can accomplish this objective. Collectively, these tools are called traffic conditioners.
Policing can be used in either the inbound or the outbound direction, and it typically discards packets that exceed the configured rate limit, which you can think of a speed limit for specific traffic types. Because policing drops packets, resulting retransmissions, it is recommended for higher-speed interfaces.
Shaping buffers (and therefore delays) traffic exceeding a configured rate. Therefore, shaping is recommended for slower-speed interfaces.
Because traffic shaping (and policing) can limit the speed of packets exiting a router, a question arises:"How do you send traffic out of an interface at a rate that is less than the physical clock rate of the interface?" For this to be possible, shaping and policing tolls so not transmit all the time. Specifically, they send a certain number of bits or bytes at line rate, and then they stop sending until a specific timing interval (for example one-eighth of a second) is reached. After the timing interval is reached, the interface again sends a specific amount of traffic at the line rate. It stops and waits for the next timing interval to occur.
This process continually repeats, allowing an interface to send an average bandwidth that might be below the physical speed of the interface. This average bandwidth is called the committed information rate (CIR). The number of bits (the unit of measure used with shaping tools) or bytes (the unit of measure used with policing tools) that is sent during a timing interval is called the committed burst (Bc). The timing interval is written as Tc.
For example, imagine that you have a physical line rate of 128Kbps, but the CIR is only 64Kbps. Also assume that there are eight timing intervals in a second (that is, Tc = 1/8 second = 125 ms), and during each of those timing intervals, 8000 bits (the committed burst parameter) are sent at the line rate. Therefore, over the period of a second, 8000 bits are sent (at the line rate) eight times, for a grand total of 64,000 bits per second, which is the CIR.
If all the Bc bits (or bytes) are not sent during a timing interval, there is an option to bank those bits and use them during a future timing interval. The parameter that allows this storing of unused potential bandwidth is called the excess burst (Be) parameter. The Be parameter in a shaping configuration specifies the maximum number of bits or bytes that can be sent in excess of the Bc during a timing interval, if those bits are indeed available. For those bits or bytes to be available, they must have gone unused during previous timing intervals.
Policing tools, however, use the Be parameter to specify the maximum number of bytes that can be sent during a timing interval. Therefore, in a policing configuration, if the Bc equals the Be, no excess bursting occurs. If excess bursting occurs, policing tools consider this excess traffic to be exceeding traffic. Policing tools consider traffic that conforms to (that is, does not exceed) a specified CIR to be conforming traffic.
The relationship between the Tc, Bc, and CIR is given with this formula: CIR - Bc/Tc. Alternatively, theformulacan be written as Tc = Bc/CIR. Therefore, if you want a smaller timing interval, you can configure a smaller Bc.
About The Author
Anthony Sequeira, CCIE No. 15626, is a Cisco Certified Systems Instructor (CCSI) and author regarding all levels and tracks of Cisco Certification. Anthony formally began his career in the information technology industry in 1994 with IBM in Tampa, Florida. He quickly formed his own computer consultancy, Computer Solutions, and then discovered his true passion-teaching and writing about Microsoft and Cisco technologies. Anthony joined Mastering Computers in 1996 and lectured to massive audiences around the world about the latest in computer technologies. Mastering Computers became the revolutionary online training company, KnowledgeNet, and Anthony trained there for many years. Anthony is currently pursuing his second CCIE in the area of Security and is a full-time instructor for the next-generation of KnowledgeNet, StormWind.com. Anthony is also a VMware Certified Professional.
CompTIA Network+ N10-008 Cert Guide contains proven study features that allow you to succeed on the exam the first time. Expert instructor Anthony Sequeira shares preparation hints and test-taking tips, helping you identify areas of weakness and improve both your conceptual knowledge and hands-on skills, essential for successful completion of the performance-based testing items on the exam. This complete, CompTIA-approved study package includes the following:
• A test-preparation routine proven to help you pass the exams
• Clearly defined chapter learning objectives covering all N10-008 exam topics
• Chapter-ending review questions and exam preparation exercises, which help you drill on key concepts you must know thoroughly
• The powerful Pearson Test Prep practice test software, complete with hundreds of well-reviewed, exam-realistic questions, customization options, and detailed performance reports
• 40 performance-based exercises to help you prepare for the hands-on exam questions
• A free copy of the CompTIA Network+ N10-008 Simulator Lite software, complete with meaningful lab exercises that enhance your hands-on skills
• More than 60 minutes of video mentoring
• A final preparation chapter that guides you through tools and resources to help you craft your review and test taking strategies
• An Exam Essentials appendix that quickly recaps all major chapter topics for easy reference, both in print and interactive digital format
• A key terms Glossary in both print and on the companion website, which acts as an interactive flash-card application
• Study plan suggestions and templates to help you organize and optimize your study time
• A 10% exam discount voucher (a $33+ value!)
Well regarded for its level of detail, study plans, assessment features, challenging review questions and exercises, video instruction, and hands-on labs, this approved study guide helps you master the concepts and techniques that ensure your exam success.
Master the topics on the CompTIA Network+ N10-008 exam, including:
• Network topologies and media types
• IP addressing
• Network services
• Data center architectures and cloud concepts
• Routing, Ethernet switching, and wireless networking
• Network availability and disaster recovery
• Network security
• Remote access
• Network troubleshooting
Reader Paulo Cardoso says, "This is a great book. In addition, it comes with great additional resources."
Learn more about the CompTIA Network+ N10-008 Cert Guide at amazon.com
More Networking Topologies Articles:
• Network Storage Server Options
• Network Broadcast Storms
• What is Fiber Optic Splicing?
• Wireless Network Vlans - How to Implement Wireless Vlans
• Technologies for the Internet of Things (IoT)
• VLAN (Virtual Local Area Network) Basics
• Understanding Wireless LAN Networking
• Introduction to SONET (Synchronous Optical Networking)
• What Are Fiber Optic Attenuators?
• What Are Pseudo-Wires?